New PT-TD430 Now Available and Ready for Delivery
New PT-TD430 Now Available and Ready for Delivery
The new PT-TD430 tapped density tester with two testing positions is now available and ready for delivery. PT-TD430 is designed to determine the tapped and apparent density of powders, granules, pigments and similar materials. The instrument combines two testing stations with an intuitive 7-inch color touch screen, integrated user and method management, and automatic calculation of important powder characteristics.
1. Two testing stations and USP methods
2. User interface and instrument design
3. Method management
4. Automatic calculations and result documentation
5. Calibration and qualification
6. Accessories and options
1. Two Testing Stations and USP Methods
PT-TD430 features two testing stations, allowing two samples to be tested simultaneously. The instrument supports both USP <616> tapping methods:
| Parameter | Method 1 | Method 2 |
| Tapping height | 14 mm | 3 mm |
| Tapping frequency | 300 taps/min | 250 taps/min |
The instrument automatically detects whether the cylinder has been placed in the correct position for the selected method. The standard cylinder volumes are 250 ml and 100 ml. Additional cylinder sets for smaller sample volumes of 50 ml, 25 ml and 10 ml are available.
2. User Interface and Instrument Design
PT-TD430 features a large, 7-inch backlit color touch screen with a modern graphical user interface (GUI). The instrument body is made from high-quality powder coated stainless steel which fully meets GLP requirements. The instrument features two testing stations. The cylinders are held in place by a bayonet catch design.
3. Method Management
The integrated user management system supports up to 100 users with individual usernames, passwords and configurable access rights. Up to 100 test methods can be stored, allowing users to conveniently select predefined test settings for different products and applications. An optional quick test mode allows testing without logging in when user access control and predefined methods are not required.
4. Automatic Calculations and Result Documentation
Following a test, PT-TD430 automatically calculates the tapped density, Hausner flowability ratio and Carr compressibility index. The Hausner ratio provides an indication of powder flowability, while the Carr index describes powder compressibility.
The integrated protocol printer documents test results and calibration data without requiring an external printer, helping to save valuable laboratory bench space. Sample weight can be entered manually or determined using an optionally connected balance. The instrument also supports data transfer to external systems.
5. Calibration and Qualification
PT-TD430 includes dedicated calibration programs for:
- Number of taps
- Tapping height
- Tapping frequency
- Weight measurement
- Timer function
The user is guided through the calibration procedures, and results can be documented using the integrated printer. A programmable qualification interval reminder helps users keep track of scheduled calibration activities. The instrument also performs a self-check when switched on. IQ and OQ documentation is included free of charge.
6. Accessories and Options
PT-TD430 is available with different cylinder sets and accessories to accommodate various sample volumes and laboratory requirements. Available options include:
- 250 ml and 100 ml graduated glass cylinders with supports
- 50 ml, 25 ml and 10 ml cylinder sets with adapters
- Optional balance connection for sample weight determination
- Noise reduction cabinet to reduce operating noise during tapping
The optional noise reduction cabinet features a transparent Plexiglass cover and allows access to the integrated printer.
Left picture: 250ml cylinder support parts, right picture: 100ml cylinder support parts










