WHT 3 ME

4 in 1 tablet hardness testing with multi-batch feeding option.

WHT 3 ME

Fully Automated 4 in 1 Tablet Testing Instrument

Test weight, thickness (or height), diameter (or length), and hardness of regular tablets, odd shaped tablets (caplets, oblongs etc.) and other solid samples fully automatically. Use the WHT 3ME for the fully automated testing of single tablet critical parameters including weight (in compliance to the European and German Pharmacopoeia for uniformity of mass), thickness, diameter and the tablet hardness also according to the European EP <2.9.8> and USP <1217> Pharmacopoeia.

WHT 3ME with WHT-SM multi-batch feeder
WHT 3 ME with WHT-SM1 single batch feeder

WHT 3ME with WHT-SM multi-batch feeder

1 / 2

Operating Principle

This instrument offers a reliable and reproducible self-contained feeder and measurement station for quality control of samples during tablet production as well as in post-production QC and QA laboratories. The WHT 3ME testing system offers four test parameters of the same sample. The instrument is offered as a stand-alone unit controlled by an external computer system. A single- or multiple-batch feeder may be used to individually file the samples into the testing system for fully automated control of different samples and batches. Using the single feeder WHT-SM1 and direct connection to an existing tableting machine is possible. The multiple batch feeder WHT-SM is used to test up to 10 different products fully automatically and unattended.

Operating principle of the Sample Positioning Falps

Use the WHT 3ME for all regular (round) and most odd shaped dosage forms. Its unique orientation “flap” design aligns automatically incorrectly positioned samples into the correct tip-to-tip hardness test position. The schematic on the right side shows the two flaps of the combined hardness and diameter testing station and the drive controlling the flap movement. Use the single or multiple batch feeder or place up to 20 samples manually into the individual segments of the sample carousel. Select the valid testing program and start the run. Below is a top down view of the sample carousel and the four testing stations of WHT 3ME:

The unique flaps are used to orient the samples - no tool change is necessary!

The unique flaps are used to orient the samples - no tool change is necessary!

From left to the right:

» Square balance dish, directly connected to a Mettler-Toledo balance cell
» Thickness testing station
» Combined diameter and hardness testing station with sample orientation “flaps”
» Separate discharge for unbroken samples
» Replaceable Teflon scrapers to clean the balance dish and hardness test station from particles

Operation Principle of the Hardness Measurement

The current monographs of the USP and EP Pharmacopoeia define how a tablet hardness testing instrument should work, but without establishing data of how to increase the applied force and when to detect a sample to be broken. This often causes problems when trying to compare results of the same tablet measured with instruments from different manufacturers. The hardness result is directly influenced by the contact speed and force increase rate of testing instrument. A faster operated test jaw means a lower reproducibility and often higher absolute results. In order to offer the possibility to select an operating mode which will offer you similar results to other instruments you may already use, WHT 3ME allows to set the force mode by selecting between linear force increase or linear speed increase and the set the force rate. When the instrument detects that the sample has been touched, it switches to the measuring mode and starts to increase the force applied to the sample.

Which Force Mode to Select?

Since more than 10 years ago all Pharma Test tablet hardness testing instruments offer the possibility to select either linear force or linear speed increase. Linear force increase offers the most accurate control, as the rate of increase is directly controlled by the electronic load cell used to read the force. Also it is quite simple to validate the correct and linear operation, as a tablet with, for example 100N hardness, will be broken within 5 seconds, when 20N/s had been set as force increase rate. Linear speed increase can also be used; here the driving speed of the stepper motor is kept linear. Actually, as long as the touching force is kept low, there is not too much difference in the results between the two modes, but validation of this mode is reasonably difficult and requires specific equipment. In general results obtained with the linear speed increase mode are less reproducible than the ones with linear force increase mode. Therefore Pharma Test recommends using linear force increase. We will continue to offer both modes of operation in order to offer the possibility of comparing results of different instruments by setting the same parameters of operation.

Sample Transportation

For sample transportation a carousel with 20 segments is used. Each of these segments takes one sample. Each segment is equipped with a Teflon scraper to clean the hardness testing jaws from cohesive products and to clean the track of residual particles. Having a carousel for sample transport, the system can be used without the need of adding a batch feeding system. Simply place one sample into each segment and start the test series. The built-in micro-processor electronics receives the test result from the balance, thickness gauge, load cell and stepper motor and then transfers the information via the RS-232 interface to the WHT32 software program running on a Microsoft Windows PC. The PC itself can be placed anywhere in the laboratory and networking options exist as well. Below on the left the sample transportation from the WHT-SM multiple batch feeder into WHT 3ME is shown and on the right the unique feature of the WHT 3ME is the “flap” device. It positions the sample precisely in the combined diameter and hardness test station.

Weight measurement of a tablet in the AHT carousel
Tablet falling into the waste dish

Weight measurement of a tablet in the AHT carousel

1 / 2

Batch Feeder WHT-SM

To feed and separate samples automatically use the WHT-SM multi-batch feeder (shown on the left). The feeder is controlled by the master WHT 3ME instrument. The sensor controlled separate vibration tracks are self-adjusted to ensure perfect sample separation and transport. The self-adjustment automatically corrects the vibration speed according to the samples weight, shape and size to minimize waste. The corrected speed is filed for the sample tested and automatically used when this sample is tested the next time.

On the left: WHT-SM1; On the right: WHT-SM0

Batch Feeder WHT-SM1

The WHT-SM multi-batch feeder system supports automated testing of up to ten different products or batches. As soon as all testing parameters for the samples have been entered the testing series can be started. The system operates with a speed of 10 to 15 samples per minute (depending on sample hardness). The WHT SM1 can be used instead of the WHT SM in case a single batch is usually tested. It is also possible to collect samples directly at a tablet press and automatically start a test run when a tablet is detected by the WHT 3ME inside the feeder. Unused samples are rejected and pass down a separate collector chute.

Tablet moving forwards onto the next station

Tablet moving forwards onto the next station

WHT32 Software Package

The WHT 3ME instrument is controlled by the powerful WHT32 software package. WHT32 is available with full 21 CFR Part 11 compliance and includes a methods and results data base, validation and calibration programs for all four testing stations, password administration, freely editable print-outs, statistical calculations and graphical print-outs for the performed test run as well as a batch statistical programs. The software is installed under Microsoft Windows NT, 2000, XP or 7 (32bit, GB/US/D language version).

Calibration and Adjustment

The current USP Pharmacopeia requires the force sensor of a tablet hardness testing instrument to be calibrated periodically over the complete measuring range (or the range used for measuring samples) with a precision of 1N. All Pharma Test tablet hardness testing instrument can be statically calibrated over the complete measuring range by the use of different traceable counterweights. All instruments support the checking of at least three different points during calibration to prove the linearity of the force sensor.

Furthermore, Pharma Test offers the PT-MT3 magnetic tablets to calibrate the breakpoint detection of the whole tablet hardness testing instrument (force sensor and mechanics of the instrument). All Pharma Test tablet hardness testing instruments are fully compliant to the requirements of the current USP Pharmacopeia. WHT32 features an access controlled calibration and adjustment program for the four testing stations.

For the thickness and diameter station, certified reference blocks sets are used for both calibration and adjustment. Weight sets are used to calibrate and adjust the force sensor (load cell) of the instrument over the complete measuring range. For the two point adjustment (zero and reference) of the load cell inside the hardness station a certified reference weight of 10 kg is used. For validation purposes the use 5 up to 50kg certified weights is recommended. The latest calibration and adjustment results are stored on and can be printed and signed. Calibrate the built-in Mettler Toledo balance cell using a 50mg calibrated reference weight.

The PTB-CAL15 weight set is ideal to perfom a three point validation of the hardness tester.

The PTB-CAL15 weight set is ideal to perfom a three point validation of the hardness tester.

Features

The main features of the WHT 3ME instrument are:

  • Tablet hardness testing in full compliance to USP <1217> and EP <2.9.8> Pharmacopeia
  • 4 results of the same sample: thickness, diameter, hardness and weight (via internal balance)
  • Dual force mode instrument with linear speed increase and linear force increase modes
  • Multiple point validation procedure for all measurement stations built-in

The main features of the WHT32 software package are:

  • Product dependent method description including number of tests to be done within each testing station, T1 and T2 tolerance classification, plausibility rejection, selectable measuring units and adjustable measuring parameters
  • Statistical calculations of mean value, absolute and relative standard deviations, minimum and maximum result
  • Batch comparison statistics
  • Networking capabilities (optional)
  • Features a robust SQL MS Jet database
  • User and password and login administration (21CFR part11 option)
  • Audit trail and data path selection (21CFR part 11 option)
  • Calibration programs for each testing station (requires calibration tools, such as reference blocks, weights etc.)
  • Result data transfer via RS-232 data interface
  • Microsoft Excel and LIMS export functionalities (optional)
  • Software IQ and OQ documentation available

Advantages

Some of the highlights the WHT 3ME instrument offers are:

  • Fully automated operation
  • Unique flap mechanism to precisely position samples for hardness and diameter test
  • No change of tools necessary to handle different tablet shapes
  • Stainless steel housing to fit well into a production area
  • Standard version of WHT32 software package included in the standard supply
  • IQ/OQ documents included free of charge

Some of the highlights the WHT32 software package offers are:

  • Integrated instrument qualification procedure
  • Automated flap control for opening and closing angle and adjustable speed (depends on sample size and thickness)
  • Automated speed adjustment for tablet transportation
  • Special transport adjustment options for “rolling” samples, like caplets
  • Special diameter and hardness test program to run deep concave tablets which tend to ”stand up” while moved for hardness and diameter testing
  • Software controlled display, data entry and calculation facilities
  • Gel Capsule weight control program
  • Immediate display and filing of all results
  • Graphical display of results either as a chart diagram or variation curve
  • Immediate documentation of all results on screen and printer
  • Calibration and validation procedures for all integrated stations

Technical Specifications

Parameter Specification
Number of Testing Stations 4 (Hardness, Thickness, Diameter and Weight)
Hardness Testing Range 2.0 – 300.0N (optional 5.0 – 500.0N)
Hardness Accuracy Better than 1N
Thickness Testing Range 2.00 – 15.00mm
Thickness Accuracy Better than ±0.02mm
Diameter Testing Range 2.00 – 30.00mm
Diameter Accuracy Better than ±0.02mm
Weight Measurement By internal Mettler-Toledo balance cell
Weight Testing Range 0.0001g – 50.0000g
Weight Accuracy 0.1mg
Sample Handling Semi- or fully automated using single or multi-batch feeder
Testing Speed 10 to 15 tests per minute depending on sample hardness
Flap Control Flap speed and opening angle steplessly adjustable
Number of Tests Up to 250 tests in one test run
Measuring Units Thickness and diameter selectable between millimeter (mm) and inches (IN)

Hardness selectable between Newton (N), Kilopond (kp) and Strong Cobb (Sc)

Force Mode Selectable between linear force increase and linear speed increase
Force Rate 5 – 200N/sec. (linear force increase) or 5 – 200mm/Min. (linear speed increase)
Calibration Procedure Using certified 1-30 mm reference blocks, 50g (for balance) and 5 to 50kg (for load cell) reference weights
Break Force Validation Using the PT-MT3 magnetic tablet at 10 to 480N
Interface RS232 serial port for PC connection
Instrument Housing Stainless steel (304) to meet GLP requirements
Power 110/230 Volt, 50/60 Hz
Packaging Dimensions Approx. 90cm x 65cm x 75cm (D x W x H); approx. 118cm x 76cm x 70cm incl. WHT SM
Net / Gross Weight Approx. 45 / 70 kg
Net / Gross Weight Approx. 73 / 105 kg incl. WHT SM
Certification All components certified to USP / EP requirements
CE / EMC Certification All CE / EMC Certification provided
Validation All IQ & OQ documents included

We reserve the right to make technical changes without any prior notice.

Included in the Standard Scope of Supply

The WHT 3ME comes ready to use with the following standard scope of supply:

  • WHT 3ME instrument
  • WHT32 software package (standard version)
  • A set of 3, 5 and 10mm reference blocks
  • Comprehensive documentation folder including:
  • User manual
  • IQ documentation
  • OQ documentation
  • Instrument logbook

 

Options

In addition to the standard scope of supply Pharma Test offers a broad range of accessories and options including:

  • Extended hardness range of up to 500N
  • WHT32 21 CFR software update for audit trail, user administration and more
  • WHT32 LIMS data transfer module
  • WHT32 Network license

Request for Quotation

Request a quote

Similar to